Na-22
Dose Calibrator S-Vial Dual Geometry Products
Dose Calibrator E-Vial Sources
All Dose calibrator sources are calibrated against a traceable National Institute of Standards (NIST) solution in a similar geometry, using a pressurized ion chamber. RadQual “E” vials contain approximately 23 cc’s of total volume with 20cc’s of active epoxy.
Each source is packaged in an individual lead shield that is color coded to the source.
All sources are shipped with a certificate of calibration, leak test certification, radiation safety handling instructions, and a custom decay calendar.
V-Vial Dose Calibrator Sources
Dose calibrator sources are available in 5cc, 10cc, or 20cc sizes.
All Dose calibrator sources are calibrated against a traceable National Institute of Standards (NIST) solution in a similar geometry, using a pressurized ion chamber.
Each source is packaged in an individual lead shield that is color coded to the source.
All sources are shipped with a certificate of calibration, leak test certification, radiation safety handling instructions, and a custom decay calendar.
RadQual Rod Sources
RadQual’s calibrated rod sources typically have a calibration accuracy of ± 3% – 5% at a 95% confidence level. Physical dimensions are 2.96 inches (75 mm) total length by 0.47 inches (11.9 mm) diameter.
RadQual’s calibrated rod sources are manufactured by gravimetric transference of NIST traceable solutions.
Calibration is confirmed using a Sodium Iodide detector.
Spot Markers
RadQual’s Spot Markers are reference sources manufactured by gravimetric transfer of Na-22 or Ge-68 sealed with an epoxy mixture and checked by ion chamber for content. There are two designs available. The traditional Lucite marker with a total diameter of 1.0 inches (2.54 cm), an active area of 0.125 inches (3 mm) and a total thickness of 0.25 inches (6.4 mm). The Aluminum marker has the same physical characteristics but is designed and approved by regulatory authorities for activity content up to 0.6 mCi (22.2 MBq) of Na-22 or Ge-68.
RadQual Rod Sources | PET
RadQual’s calibrated rod sources typically have a calibration accuracy of ± 3% – 5% at a 95% confidence level. Physical dimensions are 2.96 inches (75 mm) total length by 0.47 inches (11.9 mm) diameter.
RadQual’s calibrated rod sources are manufactured by gravimetric transference of NIST traceable solutions.
Calibration is confirmed using a Sodium Iodide detector.